GA-SC23 USB Audio Interface has two combo inputs, which means you can connect your equipment to this sound card (audio interface) with an XLR cable, and you can also connect them with a 6.3mm studio jack cable.
It depends on the type of equipment you are going to connect to this audio interface, such as a microphone, instrument, guitar, etc. Each of them has the ability to adjust the loudness and intensity of the sound separately by means of the knob.
It has +48V phantom power that you can turn it on or off with a button. Also, this audio interface has a 6.3 mm jack output for monitoring speakers.
The headphone port has the ability to monitor the sound at the same time, as well as the ability to control the loudness and intensity of the sound.
The hi-z button is used to record audio with high-impedance instruments without amplifying the audio signal.
The loopback function allows you to record the sound that is in your computer, such as music, at the time of recording with your voice by this audio interface. This feature is used for chatting, streaming and live performances.
Features:
[easy to install and use]:
To use this sound card (audio interface) you don’t need any software to identify it in the computer and you can connect it to your computer using the cable included in the package of this product.
A sound card or audio interface is a device that processes your analog input information that enters this device through a microphone, instrument, etc., and converts it into digital and understandable information for your computer or mobile phone. Then, with the available software for sound editing, you can mix and master and edit your recorded sound.
USB Audio Interface | Type |
20Hz to 20KHz | Frequency Response |
24bit/192kHz | Sample Rate |
4 (XLR input x2\6.35 mic input x2) | Channel No. |
82 Db | Dynamic Range |
Asio4All | Driver |
*Two input channels and two 6.3mm output channels
*Hi-z input for high impedance sources of guitars and other instruments *LowCut function *Direct Monitoring function *Stereo/Mono function *Loopback function *The ability to monitor the sound simultaneously during recording *Internal +48volt phantom power *USB2 port to connect to a computer and supply power to the device *one 3.5mm TRS output monitor jack *Compatible with all audio recording and editing software |
More |
Content Creation / Podcast / Vocal / Instrument /Home Studio | Recommended Applications |
Reviews
There are no reviews yet.